Abstract:The Navy Ohio Replacement Ballistic Missile Submarine Program is a major endeavor aiming at designing and building a new class of 12 ballistic missile submarines (SSBNs) to replace the current force of SSBNs. Current Ohio-Class SSBNs are armed with Trident ballistic missiles or Tomahawk missiles if… more
Abstract:ABSTRACT: Fires initiating in engine nacelles and dry bays are the most common causes of loss of aircraft. However, since the Montreal Protocol restricting the production of Halons, a replacement has not yet been accepted by the aircraft survivability community despite numerous testing programs.… more
Abstract:ABSTRACT: Abstract (No proprietary info): Thermal interface materials (TIMs) constitute an essential part of thermal management which is quickly becoming the limiting factor in high power, high functional density, and increasingly small-sized electronics for future U.S. Air Force (AF) platforms.… more
Abstract:Adaptive Methods, teamed with Navmar Applied Sciences Corporation (NASC), proposes to develop algorithms for a Tactical Decision Aid (TDA) capable of adaptively tracking and predicting the locations of drifting mines. The TDA is capable of optimizing Mine Counter Measure (MCM) asset deployment plans… more
Abstract:This proposal addresses the challenges presented by multiple systems currently fielded onboard various Navy platforms containing incoherent USW C2 capabilities. These systems include CV-TSC, USW-DSS, SQQ-89/CADRT, GCCS-M, CFn and SWFTS. The redundant and overlapping capabilities, amplified by less… more
Abstract:This proposal addresses the challenges presented by multiple tactical pictures being fielded via various Navy systems that attempt to provide a"Common Tactical Picture"(CTP). These systems include CV-TSC, USW-DSS, SQQ-89/CADRT, GCCS-M, AEGIS, SSDS, CFn and SWFTS. These redundant and… more
Abstract:Submarines have a need for situational awareness at all times. They are equipped with Fat Line acoustic arrays such as the T-16 and the TB-34 in order to provide this awareness. However, at low tow speeds the array droops from front to back and also loses straightness. This spatial distortion… more
Abstract:Current Air ASW sensor systems are complex in form and function with many operational settings as is the nature of the littoral and deep-water range- and time-dependent underwater acoustic environments in which the Navy applies them. Determining 3-dimensional sensor distributions and settings for… more
Abstract:Anti-Submarine Warfare (ASW) acoustic mission planning is a very complex problem that needs to take into account many factors to achieve overall mission objectives. Blue Force capabilities and vulnerabilities, Red Force capabilities and vulnerabilities, ASW mission posture and priority, search time… more
Abstract:Current US Navy sonar recorder systems have often been developed as adjunct tools for data collection without consideration of a holistic approach for system wide record and playback. Specifically, many existing fleet systems have an assortment of unique recording tools that are specialized for… more
Abstract:Neutron Scattering has been an extremely productive materials science probe for over 60 years. It is no exaggeration to say that any technology that uses plastics has benefitted from it in some way from Small Angle Neutron Scattering (SANS). Unfortunately, SANS is limited to studying molecular… more
Abstract:Sensintel Inc., White River Technologies, and Raytheon Missile Systems propose to develop a small unmanned aircraft system (UAS) magnetically quiet enough to enable the employment of small Magnetic Anomaly Detection (MAD) sensors and capable of performing the High Altitude Anti-Submarine Warfare… more
Abstract:Landing gear systems are one of the more problematic subsystems on Naval aircraft. Landing gear failure can be caused by hard landings due to actual severe high sink rate with high enough GW to exceed the design strength, but are extremely rare. More common are fatigue and environmentally caused… more
Abstract:ABSTRACT: The U.S. Air Force typically requires restoration of corrosion affected aircraft components in hidden and/or hard to access areas. These aircraft structure and components are typically manufactured from aluminum substrates, as well as other alloys like titanium, and low alloy, PH and Cres… more
Abstract:Additive manufacturing technology creates objects using a sequential layering process that directly contrasts with the traditional subtractive approaches commonly used to manufacture the majority of fabricated components. The additive manufacturing technology can be used anywhere throughout the… more
Abstract:Advanced Cooling Technologies, Inc. (ACT) proposes the development of an advanced finned-tube heat exchanger with an integrated phase distributor. Studies have shown that the heat transfer improvements available in the commercial market allow for smaller and lighter heat exchangers compared to… more
Abstract:Advanced Cooling Technologies, Inc. (ACT) proposes the development of an Environmental Control Unit (ECU) that uses an integrated Phase Change Material (PCM) to provide thermal energy storage. The PCM is contained within the system. During the thermal energy regeneration or collection stages of… more
Abstract:Industrial and utility applications utilizing dry cooling for condensing process steam are less efficient than their closed-loop cooling counterparts, resulting in higher energy consumption and operating costs. However, dry cooling is a necessary process in areas where cooling water supply is not… more
Abstract:An innovative, high destruction efficiency, and low fuel consumption VOCs incinerator is proposed to reduce VOCs from condensate tank, or other low heat value waste gas emissions from different air pollution sources. The proposed technology use highly effective heat recirculation to extend the… more
Abstract:ABSTRACT: This Small Business Innovation Research (SBIR) Phase I project proposes to develop and demonstrate a test apparatus for determining the minimum hot surface ignition (HSI) temperature of flammable liquids. Flammable liquids leaking onto hot surfaces, such as those in an aircraft engine… more
Abstract:The proposed study will investigate several technology concepts capable of producing hydrogen on site from water and supplying it to an operating marine diesel engine. Addition of a small amount of hydrogen to the intake air-fuel charge can enable the engine to operate with better performance,… more
Abstract:The continuous push towards higher photon energies and higher imaging resolution has brought current state- of-theart X-ray focusing zone plates to a limit of 20 nm resolution at & lt;10 keV photon energies. Zone plates for focusing with same or better resolution at energies up to 25 keV are… more
Abstract:ABSTRACT: A Universal Data Transfer Device (UDTD) is proposed which will standardize Data Transfer Devices used in various forms of aircraft. This proposal is for a Phase I effort that will investigate options for a new technology developing proposing new standard for digital, removable, ruggedized… more
Abstract:Rip currents cause multiple drowning deaths each year as swimmers are often unaware of the location and strength of coastal currents. Currently, ocean safety officials do not have an affordable and reliable commercial system which can measure coastal currents. The goal of this Phase I study is to… more
Abstract:This Small Business Innovation Research (SBIR) Phase I effort will demonstrate the feasibility of a fail-safe reusable Forward Closure System (FCS) for use in underwater launch tubes. The proposed FCS will be reusable, fail-safe, scalable, capable of withstanding pressures, and have an opening time… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.