Abstract:Existing field-compatible coating thickness measurement systems are not capable of advanced material coating characterization. With rapidly rising percentages of advanced composite materials used in manufacturing military and civil aircraft, many of these systems, including magnetic and simple… more
Abstract:Existing high pressure watertight hatches on U.S. Naval submarines have complex operating mechanisms and many steel components which are susceptible to significant corrosion and maintenance issues when subjected to immersion in sea water. The objective of this project is to develop a new and… more
Abstract:A non-inductive rotary actuator system is proposed to move canards in miniature guided munitions without magnetic interference. This new actuator is a piezoelectric ceramic motor that uses ultrasonic vibrations to directly rotate a shaft with high torque and speed and without gears or other… more
Abstract:There is a critical need for lighter, smaller, and higher performance optical components in many military programs. Glass molding technology can meet these demands through its ability to mass produce complex geometries with high degrees of accuracy and precision. Nearly all future programs that… more
Abstract:The long term goal for unmanned ground vehicles (UGVs) in the services is to act as force multiplier, to reduce risk to human personnel, and to enable new tactics, techniques, and procedures (TTPs). UGVs are intended to support a wide range of mission types ranging from EOD, to reconnaissance, to… more
Abstract:August Research Systems, Inc. proposes to establish the feasibility of rapidly deployable, thin-film camouflage coatings for on ground vehicles. The film-based coatings will leverage the robust and expanding vehicle wraps industry, which provides full-vehicle appliqu, systems that are digitally… more
Abstract:The need for controlled medical tissue regeneration for use in trauma or disease therapies has long existed. Only recently, however, has sufficient technology been developed to even begin exploring potential human applications. A key breakthrough was the discovery of the stem cell as a significant… more
Abstract:BMB Discount Guns, Ammunition, and Supplies proposes to develop a novel form of dim tracer ammunition. This ammunition is a non-burning, chemically inert, constant mass tracer. This design of this dim tracer is such that it cannot be perceived by enemy forces, even with enhanced optics. This… more
Abstract:Pacific Blue Innovations proposes to develop a concept for a dual purpose hand grenade which will operate selectively in a Non-Lethal and a Lethal modes. The grenade offers a fast and simple field conversion from an intrinsic Non-Lethal Mode to a Lethal one. In one configuration the grenade is made… more
Abstract:The MEMS accelerometer described uses an innovative method of ensuring extreme shocks while providing high-bandwidth, milli-g sensitivity within a fraction of a millisecond. With overall dimensions of approximately several cubic millimeters, the device can readily be used on all munitions.
Abstract:In this effort, we propose to develop a passive (multi-static) radar processing receiver that is digitally based, automatically adaptable to the signal environment (adaptive exploitation), has a wide digital bandwidth (500MHz), incorporates a wide field of view (near 180 degrees forward looking),… more
Abstract:To combat the increasing sophistication in emitter design, we propose to develop a general, open architecture, multi-algorithm, wide-band emitter identification system. Given the diversity and breadth of solid state design techniques used in present day and future advanced radar systems, no one… more
Abstract:It is proposed to demonstrate through modeling and simulation the feasibility of producing a constant velocity accessory drive (CVAD), using a novel continuously variable transmission. This drive will enable an alternator to produce full rated power while operating at idle and across the full range… more
Abstract:The AquaQuIPS multi-INT, ship track data fusion engine has shown exceptional performance during numerous Navy Exercises, including Trident Warrior 08 and Trident Warrior 09. AquaQuIPS finished as a Top Ten technology and has been chosen for an experiment to interdict self powered semi submersible… more
Abstract:The expanding demand for Intelligence, Surveillance, Reconnaissance (ISR) information, analysis, and real-time data to support the warfighter activities has resulted in an increasing number of multiple systems, applications, data sources and stores. This increased capabilities need has the… more
Abstract:Although published magnetic gear designs have been demonstrated in various and sundry academic settings, none are viable for industrial scale / military applications. Yet the technology remains enticing. The favored solution involves a topology that capitalizes on a cycloidal operation, but with… more
Abstract:Phase I objective includes completion of the Engineering design of the HgCdTe annealing apparatus and to deliver a sufficiently complete schematic design to the Government for their evaluation. Phase II plan entails building and delivering the annealing apparatus to anneal 3-inch large HgCdTe… more
Abstract:Our proposed large wafer re-usable annealing system (RAS) will significantly increase temperature stability, uniformity, and control - increasing the yield of high quality MCT devices. Provided in this proposal is a detailed process for engineering an advanced annealing system, that begins with… more
Abstract:The objective of this proposal is to demonstrate the feasibility of producing a multi-node communication network with low latency for use in the hardware-in-the-loop (HWIL) test environment. In the HWIL environment, multi-node connectivity latencies ideally would be at or near zero to prevent the… more
Abstract:Based on our analysis, we believe the biggest technology difficulty will be the pixel layout real estate constraint created by the 20um pixel pitch against the various specification requirements like two color, low flux operation, low noise, high dynamic range, variable gain, integrate while read,… more
Abstract:The feasibility of an in-situ, real-time, non-contact system for optically monitoring temperature in the range 25-800C on Si, GaAs, and CdTe-buffered Si/GaAs substrates will be demonstrated. Real-time measurement of thin-film stress and surface reflectivity during deposition on these substrates,… more
Abstract:A vacuum system with pressures typically below about 10-9 torr is required to mitigate thermal background collisions when producing Bose-Einstein condensates (BEC) and other forms of ultracold matter. Traditional setups contain multiple vacuum chambers, often employ the use of large ion pumps, and… more
Abstract:This SBIR Phase I proposal to the Department of Defense, Army, requests funding for Innova Materials to demonstrate the feasibility of a technology for providing the highest levels of safe, cost-effective, continuous antimicrobial protection for products and materials. The proposed technology is… more
Abstract:CADNexus proposes to develop a complete integrated system for CAD model preparation built on best-in-breed products from CADNexus and ESI Group. The combined solution holds promise for greater automation and robust capability to deal with CAD model preparation problems in all the popular CAD formats… more
Abstract:Graphene nanoparticles (platelets) exhibit extremely high conductivity and transparency, excellent mechanical properties, and facile processability that can be supplied at much lower cost than other carbon forms like nanotubes. Graphene also features tailored chemical functionality, which allows… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.