Abstract:Acree Technologies Incorporated (ATI) has demonstrated the effectiveness of using an innovative Cathodic Arc Plasma Source (CAPS) to produce high-density plasma for control of supersonic air flow. ATI proposes to use its CAPS system for actuation on the Common Aero Vehicle (CAV). The purpose of this… more
Abstract:Acree Technologies, Inc. (ATI) has demonstrated the effectiveness of using an innovative Cathodic Arc Plasma Source (CAPS) to produce high-density plasma for pressure changes of over 100% in a Mach-5 flow. ATI proposes to use its CAPS system for actuation of supersonic and hypersonic missile systems… more
Abstract:In this project a novel plasma source known as a CAPS will be used to produce high-density plasma for rapid and reliable detonation initiation for Pulse Detonation Engines (PDE). The CAPS will be run at 100's of Hz and deliver 1-2 J of energy per pulse. CAPS plasma sources produce dense, hypersonic… more
Abstract:The Small Business Technology Transfer Research (STTR) Phase I Project will use an already established filtered cathodic arc deposition (FCAD) process for building precise nano-scaled structures necessary to produce high-performance exchange coupled magnets (ECM). Theoretical calculations show… more
Abstract:ACTA Incorporated (ACTA) and Sandia National Laboratory (SNL) propose a six-month STTR Phase I feasibility Project titled "Expedited Transition of Propulsion Modeling & Simulation Capability." The stated objective of this solicitation topic is to expedite industry transition of a validated safety… more
Abstract:ACTA Inc. and Los Alamos National Laboratory propose to develop a high fidelity physics based modeling and simulation toolset for use in evaluating the hazards and consequences associated with hypergol fuel accidents for use in missile defense applications. Los Alamos' CartaBlanca multi-physics… more
Abstract:Immersion lithography using available 193 nm optics and laser sources provides an attractive near-term path to reducing the printable feature sizes of integrated circuits by using a high-index fluid to reduce the wavelength at the wafer, rather than using light with higher photon energy and shorter… more
Abstract:This Small Business Innovation Research Phase I project addresses an immediate need for a short-wavelength, narrow-bandwidth, high-brightness light source for ultra-high-resolution angle-resolved photoemission spectroscopy (ARPES). Low-photon-energy laser sources (~6 eV) have recently been applied… more
Abstract:A shock mitigating seat will be developed for the Expeditionary Fighting Vehicle (EFV). The seat will be designed to protect occupants from the high vibration and shock loads that are present inside the crew compartment. An additional benefit is that these systems will be capable of mitigating… more
Abstract:With the advent of the CCATTs a need exists for monitoring not only the vital sign information generated by a Propaq monitor but for additional hemodynamic and neurologic data to complement the Propaq data, especially in the event that the patient becomes destabilized during transport. Following… more
Abstract:The objective of this proposal is develop a concept for embedded peer-to-peer human/robot interaction that will allow a robot to work side-by-side with a person or a group of people in contrast to more traditional deployments of robotic hardware which keep the robots and humans very far from each… more
Abstract:DESCRIPTION (provided by applicant): Age-related macular degeneration (AMD) is the major cause of irreversible loss of vision in the adult population. AMD can be classified into the dry form and the wet form. The dry form involves apoptotic changes in
the photoreceptor cells or the retinal… more
Abstract:DESCRIPTION (provided by applicant): The average person in the U.S. contains detectable levels of more than 100 industrial compounds, pollutants, and chemicals, but predicting the relative risk of this exposure, especially over time, is challenging (US CDC
, 2003). Successful development and… more
Abstract:We propose to design and implement algorithms for the remapping of scenes from one or more existing views. The routines to be developed will present realistic virtual views from any desired direction. Realism of the views increases with additional information about the cameras, scene and with the… more
Abstract:Aculight Corporation, together with Lockheed Martin Missiles and Fire Control (LMMFC), proposes a novel system approach that uses a mature 3D imaging laser radar (LADAR) design and leverages existing 3D image processing algorithms to meet the needs for an autonomous, real-time, 3D change detection… more
Abstract:The Phase I effort will show the feasibility of reaching 10+kW average power in Yb-doped, photonic waveguide amplifiers emitting near-diffraction-limited output beams. We will show that this innovative technology permits us to avoid nonlinearities and thermo-optical fracture, while producing near… more
Abstract:A pulsed fiber laser capable of very rapid amplitude modulation is proposed. Producing more than 5 W output at 532 nm, the system incorporates a very fast fiber-coupled electro-optic modulator, capable of reproducing waveforms up to the 10 GHz range. When used in a hybrid lidar-radar system, the… more
Abstract:Aculight Corporation and ITT have teamed to develop a brassboard Raman sensor technology providing a clear path to a fully integrated sensor capable of detecting trace amounts of explosives at 30+ meters. Because of the maturity of the Aculight pulsed fiber laser technology and the ITT family of… more
Abstract:We propose the development of a multi-function, high-peak-power all-fiber-based laser source capable of operation in a wide range of pulse formats and designed for deployment in harsh environments.
Abstract:First generation mid-infrared lasers contribute to the prohibitively high life cycle cost of infrared countermeasures systems, precluding their broad application in helicopters. We propose to develop a fiber amplifier-based IRCM laser transmitter that will contain all optical beams within optical… more
Abstract:We propose the development of a high-peak-power pulse fiber laser operating at eye-safe wavelength to be used as transmitter in laser radar (LIDAR) applications. The laser will support long range and high range resolution and will be designed for fast transition to actual field deployment.
Abstract:High Energy Lasers (HELs) are required for a variety of military directed energy applications including area protection against rockets, artillery, and mortars (RAM). A typical laser enabling these applications should provide at least 10 to 100 kW of output power with excellent beam quality.… more
Abstract:Spectral Beam Combination (SBC) has been proven as a scalable beam combining approach for high power fiber lasers. Demonstrations at Aculight have shown 522 Watts of near diffraction limited power from three combined fiber laser sources; and the dispersive element, a Multi-Layer-Dielectric (MLD)… more
Abstract:Aculight, teamed with Lockheed Martin Missiles and Fire Control (LMMFC), will deliver a system for remote capture of biometrics for screening processes in the Phase II of this proposed work. This system will have a range in excess of 100 meters, if needed, and supply facial depth resolution of < 2… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.