Abstract:This Small Business Innovation Research (SBIR) Phase I project seeks to assess the feasibility of a completely new semiconductor radial heterostructure (e.g. CdTe/Au) with modulated composition and fabrication method for very low cost, highly efficient nanostructured solar cells application. This… more
Abstract:Adaptive Materials Inc. is proposing to further the development of a Phase I SBIR Power Manager. The Power Manager Phase I device has demonstrated the ability to efficiently manage and provide power to multiple sources. The Phase I device also demonstrates a user interface that is intuitive and… more
Abstract:The Small Business Technology Transfer (STTR) Phase I project will demonstrate the feasibility of using self-assembled mono-layers to dramatically improve the cost performance of OLED displays. The OLED industry is interested in p-i-n structured OLEDs because they can be fully printed in open-air… more
Abstract:The Small Business Innovation Research Phase I project will demonstrate the feasibility of using white light-emitting polymers in a fully printable manufacturing process to dramatically improve the cost and efficiency performance of organic light-emitting diodes (OLED) flat lamps. Both the OLED… more
Abstract:The objective of this project is to develop a multi-purpose combination type optical fiber sensor that enables simultaneous sensing of microstructural evolutions in the sensor materials and the environmental conditions such as pressure and temperature. It is very well known that materials subjected… more
Abstract:This Phase I project is to investigate the feasibility for achieving EUV detectors for space applications by exploiting the ultrahigh bandgap semiconductor - AlN. We plan to devise methods to improve the AlN epitaxial material quality and device structures for EUV detectors. Specifically, we will… more
Abstract:Higher Field Magnets, used in high energy physics (HEP) research, demand higher field materials such as Bi2212 round superconducting wire. The Bi2212 wire-manufacturing process depends on the coil-fabrication method and wire-insulation material. For example, the wind-and-react method requires the… more
Abstract:This proposal presents a Phase I SBIR project to develop a high precision, low disperse rate powder disseminator for the US Army. In the development of the sensitive detecting agent, we need to release a precise amount of C&B agents in the controlled detection experiments. However, such a… more
Abstract:The Air Force seeks a large production wind tunnel seeding system with full field steering capability. Additionally, the system must offer control of the particle size and density along with minimal maintenance and flow disturbance characteristics. These features will increase tunnel productivity,… more
Abstract:Advance Technologies is proposing a formal software development effort to translate the State Transition Logic algorthims developed under NCHRP Project 3-66. We are proposing the use of free software such as GNAT, Linux and Umbrello to assist us in the software development. Advanced Technologies… more
Abstract:Organic matter is a major constituent of airborne particles, comprising 20-50% of their mass. Identification of its components is critical for tracing sources, elucidating transformation and formation processes, assessing affects on human health, and assessing affects on global climate. Therefore,… more
Abstract:DESCRIPTION (provided by applicant): A miniature "growth tube collector" will be developed to provide the concentrated collection of multiple, sequential airborne particle samples directly onto a "collection wafer". This instrument will encapsulate individual particles within micrometer-diameter… more
Abstract:Detection systems for aeropathogens require the concentration of airborne particles from large volumes of air into small volumes of liquid. This proposal addresses this need through droplet encapsulation of airborne particles, with subsequent capture into a microliter-sized collection reservoir.… more
Abstract:Aethercomm will investigate feasibility of producing an amplifier covering a 225 to 2000 MHz frequency range with an output power of 50 watts. Potential wideband gap materials will be evaluated to suit this need. Additionally, a space study will be conducted to ensure the final product will… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project will study effective models for carrying out assessments employing challenging puzzle-like questions that incorporate distractor analyses in which meaning is assigned to complex responses. Such distractor analyses apply where there is… more
Abstract:Opportunities exist to utilize proven robotics technology to automate the process of building air-launched ready service weapons aboard aircraft carriers and amphibious assault ships. Affordable and reliable automated systems, working in concert with crew members, promise means to increase ordnance… more
Abstract:Current Naval microwave power amplifiers operate at power densities around 200-500 W/cm2. Amplifiers under development may operate at 2-4 times this power density. Despite the development of active cooling technologies, the principal technology for removing heat from a chip remains thermal… more
Abstract:As technology trends towards higher system data rates with reduced size and cost, the ability to create high-speed electrical interconnections at low cost is becoming critical. High-speed I/O, integrated along with high I/O parallellicity, is allowing interconnects to achieve over 1Tb/s of total… more
Abstract:Aguila Technologies, together with Sensis Corporation, proposes innovative and practical solutions for the assembly and thermal management of active phased array Transmit/Receive modules employing high power density wide bandgap electronic devices. Our approach involves mounting the wide bandgap die… more
Abstract:DESCRIPTION (provided by applicant): In several recent PA's, the NIH has articulated a clear vision for the future of medical imaging systems a) enhanced spatial or temporal resolution, b) better sensitivity and specificity, c) multi-modality, and d) new functional or molecular imaging or… more
Abstract:An innovative methodology for the integrated, systematic and model-based design of mobile ad hoc networks (MANET) is proposed based on a practical operational view of a MANET. It combines practical abstractions and models of the key components of a MANET, multi-criteria optimization for tradeoff… more
Abstract:We propose to develop a new fiber optic switch for IRCM applications. The purpose of the phase I program is to demonstrate the feasibility of a high power 1xN (N=2-6) fiber optic switch operating in the mid IR region. By carefully optimizing each individual optical component, the optical switch will… more
Abstract:DESCRIPTION (provided by applicant): In current medical practice, breast biopsy serves as the gold standard for determining if a breast mass is benign or malignant. Mammography is the main imaging procedure (screening) for detecting suspicious findings with its high sensitivity but its lower… more
Abstract:This SBIR Phase I project will develop an evidence-based approach to maximize learning for K-12 students and predict learning outcomes. We propose to analyze data at multiple levels, including individual and group assessment data, and characteristics of the student, teacher, principal, and school. … more
Abstract:The U. S. Army has a need for reliable and durable in-cylinder thermal barrier coatings to reduce high power density diesel engine component structural temperatures and heat rejection. Phase I program bench testing results identified thermal barrier coating topcoat systems that reduced radiant heat… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.