Abstract:DESCRIPTION (provided by applicant): The long-term goal of Healthy Dining Finder is to help reduce the prevalence of risk factors related to obesity and nutrition-related diseases by increasing the availability of, and information about, healthier meals at
restaurants nationwide. With the… more
Abstract:3D Research Corporation and Aerojet, Incorporated, propose a novel approach to munitions modeling to assure the munitions meets Insensitive Munitions (IM) requirements of DoDD 5000.2-R and MIL-STD-2105C. IM validation of munitions requires extensive testing, and it is necessary to develop… more
Abstract:3D Research Corporation and the University of Alabama in Huntsville have teamed to offer advanced high-energy gel propellants for exoatmospheric interceptors. High energy gelled propellants are required to improve the performance envelopes of future MDA missile interceptors. We will theoretically… more
Abstract:Our goal is to deliver a integrated hybrid power management device to the special operations soldier to minimize the burden of carrying unnecessary weight due to various batteries. Our proposed device includes a programmable voltage output, simple user interface, and a modular design that allows… more
Abstract:DESCRIPTION (provided by applicant)
The primary aim is to facilitate the development and delivery of live, interactive HAZWOPER training through the use of internet-based Advanced Training Technologies (ATT). To this end, ATL has designed the ATL Web-based Training Center as a fully integrated… more
Abstract:The goal of this SBIR Phase II project is to bring the demonstrated Gallium Nitride (GaN) microdisplay technology to industrial maturity and to final commercialization levels. The project's goal will be accomplished by further optimizing the microdisplay device structural design and fabrication… more
Abstract:DESCRIPTION (provided by applicant):
This project is to develop an instrument to measure the polarization of a hyperpolarized noble gas, Helium- 3 and Xenon-129, for enhanced lung MRIs in a clinical environment. It is essential to have some means of measuring polarization at various stages in the… more
Abstract:This Small Business Technology Transfer (STTR) Project will result in the generation of a new nano-technology specifically tailored to increase the efficiency of the boiling processes used in heat exchangers and electronics cooling hardware. Unlike traditional flat surfaces and previously… more
Abstract:This Small Business Technology Transfer (STTR) Phase I project develop a new generation of proton exchange membrane (PEM) technology. The proposed project will investigate processing techniques for synthesizing polyphosphazine membranes, which are hydrogen bonded to form supramolecules. Such… more
Abstract:DESCRIPTION (provided by applicant): A new protein fusion expression system was conceptualized and is being developed to provide tag-free recombinant protein purification via one-step chromatography. Phase I of this project includes optimization of the activity of the key component in the fusion… more
Abstract:AdveNSys will develop a suite of products to provide new orthotic and prosthetic options for people with lower limb dysfunction or lower limb amputation. We will enhance our biologically-inspired adaptive neuromorphic control systems technology and integrate it with biomorphic compliant actuators,… more
Abstract:Aero Thermo Technology, Inc., and our partner ITT, propose a focused research effort to address key lethality aspects for miniaturized, low weight kill vehicles in support of the Multiple Kill Vehicle (MKV) Program. Lethality is a critical issue for BMD concepts that employ small, low mass kill… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project will build a first-release Web-based system for content authoring and delivery that supports multiple approaches to pedagogical practice and provides efficient, easy to use methodologies with which course designers can employ system… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project will study the feasibility of creating test construction tools that allow school educators to conveniently produce and deliver tests ranging from informal assessments of mastery that can be given and taken on the fly, to tests that… more
Abstract:Opportunities exist today to utilize proven robotics technology to automate the process of building air-launched ready service weapons aboard aircraft carriers and amphibious assault ships. Affordable and reliable automated systems, working in concert with crew members, promise means to increase… more
Abstract:There is a need for improvement in the performance of thermally and electrically conductive polymeric adhesives used in electronic packaging. In particular, there are few polymeric materi-als that are suitable for replacing eutectic solder bonding in electronic devices used in high-temperature… more
Abstract:The Government is deploying a growing number of radiation detectors at U.S. borders, ports of entry and other key locations, intended to assist in the detection of a potential terrorist`s nuclear explosive device or radiological dispersal device. The most widely deployed radiation detector products… more
Abstract:DESCRIPTION (provided by applicant): The aim is to develop a high resolution, high contrast detector for digital x-ray imaging systems. The target detector would have a Detective Quantum Efficiency much greater than 80%, a limiting resolution of at least 10 lp/mm, ultra-low noise, linear response… more
Abstract:Building on prior success in detector electronics, we propose to design and fabricate a 256 channel readout ASIC for solid state gamma radiation array detectors having a power consumption of less 100 microW/pixel, an event detection throughput of more than 10,000 events/sec, and a dynamic range of… more
Abstract:We will develop a permanent fiber optic splice prototype that is specially designed to meet the stringent performance and reliability requirements for military and aerospace avionic applications. This permanent fiber optic splice is intended to provide < 1 dB change in insertion loss over a wide… more
Abstract:DESCRIPTION (provided by applicant): We propose an innovative approach combining two separate, novel techniques to greatly enhance accurate detection of leukemia or lymphoma cells, which can be used ultimately for diagnostics and early detection of minimal residual disease (MRD) in bone marrow,… more
Abstract:78241S Today¿s mechanical, hydrogen compression technology is inefficient, costly, unreliable, and lacking in durability. The inefficiency is derived from the fact that piston and diaphragm compressors are, essentially, isentropic machines. The other problems mentioned above are common to… more
Abstract:Despite fifteen years of R&D, PEM fuel cell power plants have not been successfully deployed on naval vessels. The principal cause is the fuel processor, which must operate on diesel fuel with up to 1wt% sulfur, but provide pure hydrogen to a PEM fuel cell that is intolerant of impurities. The… more
Abstract:This program proposes to develop advanced thermal barrier coatings and an advanced thermal insulating exhaust port runner to reduce high power density diesel engine heat rejection. Analytical Engineering, Inc. along with APS-Materials, Inc. and Ceradyne Thermal Materials will develop and bench test… more
Abstract:Ballutes, or inflatable decelerators, offer significant advantages over rigid shells for aerocapture of planetary spacecraft and for earth reentry of cargo by providing mass savings and simplified packaging features. Traditional ballutes, however, have provided little or no trajectory control. For… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.