Abstract:A critical aspect of operating and maintaining an offshore wind turbine is turbine access. By facilitating crew access to turbine in most any weather, repair and maintenance tasks can be performed in a timely manner. This enhances turbine availability which in turn increases annual energy… more
Abstract:The increase in extreme weather events over the past several decades has underscored the need for regional planning strategies that will support future preparedness and mitigate climate change impact on local communities across the United States. While existing climate modeling tools for… more
Abstract:Advanced rotary shear technologies from this project will reduce the cost of reactor-ready feedstocks and improve the energy balance for advanced biofuels, thus moving the nation towards import oil independence.
Abstract:GS Engineering has developed through Phase I SBIR efforts, a variable VCI solution to evaluate and characterize vehicle operating terrain, for dynamic selection of CTIS operating modes, with no required operator input. By continually monitoring the terrain and adjusting the operating mode and… more
Abstract:More than 8900 MTVR"s are in service with the Marine Corps and with its proven off road performance and survivable armor package, the MTVR continues to be heavily used in theater for logistics and other missions. The MTVR currently uses mild to medium strength steel or ductile iron components… more
Abstract:This proposal is submitted in response to the SBIR/STTR High Energy Physics Solicitation Topic 33(a).
The need is for strands that operate at a minimum of 15 Tesla (T) field, with preference for production scale ( & gt; 3 km continuous lengths) wire technologies at 15 to 25 T with reduced… more
Abstract:Mesa Photonics proposes a new method for online diagnostics at x-ray free electron laser facilities. This diagnostic can be fully automated, switching among alignment, jitter measurements, and pulse characterization. In this SBIR project, Mesa Photonics will develop a new diagnostic for measuring… more
Abstract:Isotopic analysis of suspect materials is an effective tool for identifying and characterizing nuclear. Isotope ratios of uranium, plutonium, lithium, and hydrogen are particularly informative for distinguishing fuel for nuclear power plants from weapons-grade material. Existing instrumentation… more
Abstract:The DOE Systems Biology Knowledgebase (KBase) was envisioned to provide a framework for modeling dynamic cellular processes of microorganisms, plants and metacommunities. The KBase will provide the tools and data to enable rapid iteration of experiments that draw on a wide variety of data and allow… more
Abstract:In the post 9/11 security environment, rapid cargo inspection has become a high priority. Cargo scanning using either radiographic imaging or active interrogation for Special Nuclear Material (SNM) requires high energy and high intensity x-rays. High intensity x-ray sources are especially important… more
Abstract:Next generation reactor concepts cater to a common goal of providing safer, longer lasting and economically viable nuclear power plants. Developing radiation damage resistant materials for both in- core and out-of core applications is a critical component of these next generation power plants.… more
Abstract:Three different modalities of radiation sterilization currently exist: gamma-ray sterilization, electron beam sterilization, and x-ray sterilization. One of the most common ways to sterilize goods is with gamma producing radioactive sources, most commonly Co-60 and Cs-137. Long-term… more
Abstract:The main focus of photonuclear physics has always been investigation of the internal spatial and spin structure of the nuclei and nucleons. While high energy photons (over 100 MeV) are used most often to probe the nuclear structure and look deep into the nucleus, intermediate energy (1-40 MeV)… more
Abstract:Electromagnetic and particle-beam modeling is an important part of the design and manufacturing of accelerator components, such as electron beam sources and RF accelerating cavities. The premier electromagnetic and particle modeling tools today allow users to exploit parallel computing… more
Abstract:In the proposed collider eRHIC, hadrons from one of the RHIC storage rings will interact with electrons accelerated in a six-pass energy recovery linac (ERL). The maximum energy of protons will be 250 GeV and the maximum energy of electrons will be 30 GeV. The machine will heavily rely on SRF… more
Abstract:Innovative solutions are sought to reduce cost and lead-time of hot gas valve components located in the post boost control system (PBCS) of the U.S. Navy"s Trident II D-5 Fleet Ballistic Missile. Current PBCS components are based on Nb, Ta10W and TZM, with protective coatings. Although… more
Abstract:In fusion plasmas, ion cyclotron range of frequency (ICRF) and lower hybrid range of frequency (LHRF) power is anticipated to be a primary auxiliary heating and current drive sources in next step tokamak experiments like ITER. From a technological perspective, several challenges remain including… more
Abstract:The recent events at the Fukushima nuclear power plant highlight the need for enhanced accident tolerance. Of particular concern is the overheating of standard zirconium alloy cladding material in a loss of coolant accident (LOCA). One of the leading, high-risk/high-reward candidates for future… more
Abstract:The ability to rapidly detect, identify and monitor chemical agents remains a challenge of significant importance to the Armed Forces. Existing chemical sensing techniques have shortcomings that inhibit widespread implementation. To address this situation, Ryon Technologies is developing a portable… more
Abstract:Buildings consume most energy and their top demand is Lighting, yet even LEDs remain inefficient and
market-traction isnt expected until 2020. This solar cogeneration cost-efficively routes actual sunshine deep
into buildings through skinny, flexible fiber optic cables for Lighting, while… more
Abstract:The last several years has seen the emergence of a new trend in HPC design the rise in the use of special purpose add-on hardware optimized for efficient math computations, such as graphics processing units (GPUs) and compute accelerators. Effectively utilizing this hardware is challenging and… more
Abstract:This proposal will result in innovative and life-saving software enabling first responders to easily see a heat map showing the probability of area for the
missing person. Sending teams to the right area saves lives, resources, and time. New research into geographic models of subject behavior,… more
Abstract:Lygos is developing new technologies for the production of high-value chemicals from renewable resources, including sugars derived from non-food biomass. The resulting technology could enable increased domestic production of chemicals near exclusively produced abroad today.
Abstract:All computing platforms, from handhelds to servers, can achieve superior energy efficiency with better control of the power supply. An integrated voltage regulator would provide improved control, but requires improvements in on-chip inductors for energy storage. This project will develop… more
Abstract:This proposal is in response to rapid modeling need in our military force. We plan to develop and demonstrate a framework that will allow warfighters to rapidly acquire and edit geospecific terrain databases, including both building exterior and interiors. The output of our models will be in… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.