You are here

Rapid Hydrogen and Methane Sensors for Wireless Leak Detection

Award Information
Agency: National Aeronautics and Space Administration
Branch: N/A
Contract: NNX10CD41P
Agency Tracking Number: 095402
Amount: $100,000.00
Phase: Phase I
Program: SBIR
Solicitation Topic Code: X8.02
Solicitation Number: N/A
Timeline
Solicitation Year: 2009
Award Year: 2010
Award Start Date (Proposal Award Date): 2010-01-29
Award End Date (Contract End Date): 2010-07-29
Small Business Information
1195 Baltimore-Annapolis Blvd., Unit #2
Arnold, MD 21012-1815
United States
DUNS: 603565883
HUBZone Owned: No
Woman Owned: Yes
Socially and Economically Disadvantaged: No
Principal Investigator
 Jacqueline Hines
 Principal Investigator
 (410) 544-4664
 jhines@asrdcorp.com
Business Contact
 Jacqueline Hines
Title: Business Official
Phone: (410) 544-4664
Email: jhines@asrdcorp.com
Research Institution
N/A
Abstract

Under NASA STTR NNK07EA39C, ASR&D developed passive surface acoustic wave (SAW) based hydrogen sensors that utilize Pd nanocluster films on self-assembled siloxane monolayers to provide rapid, reversible room temperature responses to hydrogen exposure. Under NASA SBIR NNX09CE49P ASR&D demonstrated wireless interrogation of SAW RFID sensor-tags. In this project, we propose to combine the results of these two technology development programs to produce wireless, uniquely identifiable SAW-based hydrogen sensors, and to evaluate the sensor response time to low levels of hydrogen exposure (down to 1 ppm). ASR&D will also implement a SAW-based in-situ Pd deposition monitor for enhanced film reproducibility. ASR&D's previous hydrogen work was based on Argonne National Labs work with similar films that demonstrated hydrogen sensing from 25 ppm to over 2% hydrogen, with response times of milliseconds, complete reversibility, and no baseline drift at room temperature. ASR&D demonstrated the ability to measure changes in such films using a SAW sensor, however our ability to test at low hydrogen concentrations and at rates exceeding 1 sample/sec were limited by our experimental test equipment. In the proposed effort, we will utilize an Environics gas dilution system to generate calibrated gas concentrations (for hydrogen and methane) down to 1 ppm, and we will utilize the electronic interrogation system being developed for our RFID work to measure the sensors. This system is capable of measuring sensor responses with a good S/N in 1 msec (or less), overcoming the prior limitations of our testbench equipment. In addition to the hydrogen sensor work, working with Temple University, we propose to evaluate the technical feasibility of producing SAW-based methane sensors using a similar SAW sensor device, but incorporating methane selective supramolecular cryptophane films. Hydrogen sensors will be TRL4 at completion of the proposed effort, and methane sensors will be TRL 3.

* Information listed above is at the time of submission. *

US Flag An Official Website of the United States Government